Vnh3sp30 Motor Driver For Mac
CNET Editors note: The Download Now link directs you to the Android Market where you must continue the download process. This md0a3 may not be available in some countries.
This carrier board for ST’s VNH2SP30 motor driver IC operates from 5.5 to 16 V and can deliver a continuous 14 A (30 A peak). 
It works with 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback.
Motor Driver Ic
Along with built-in protection against reverse-voltage, over-voltage, under-voltage, over-temperature, and over-current, these features make this product a great general-purpose motor driver. Note: The VNH3SP30 motor driver used by this board has been discontinued by ST. We strongly recommend our as an alternative. Overview Pololu High-Current Motor Driver Carrier pinouts and dimensions. This module is a compact breakout board for ST’s high-power or motor driver IC, each of which is a fully integrated H-bridge that can be used for bidirectional speed control of a single brushed DC motor. The basic operation of the driver is summarized below, but we also recommend careful reading of the (670k pdf) or (586k pdf) before using this product.
Motor Driver Arduino
The board incorporates most of the components of the typical application diagram on page 8 of the VNH2SP30 datasheet, including pull-up and current-limiting resistors and a FET for reverse battery protection. It ships fully populated with its SMD components, including the VNH2SP30 or VNHSP30 motor driver IC, as shown in the product picture. (Note that the current sense circuit might not be populated on the VNH3SP30 version of the board since only the VNH2SP30 supports current sense.) Note: Only the and support current sense; the current sense circuit might not be populated on the version of the board. For more information on the differences between the motor driver versions, see the comparison table below.
